Headphones.com - Shop the best headphones and home audio

ELAC Debut 3.0 DB63 6.5" Bookshelf Speakers - Pair

ELAC Debut 3.0 DB63 6.5" Bookshelf Speakers - Pair - Main image
$369.26 $499 In stock

Category: Bookshelf Speakers

The ELAC Debut 3.0 series was developed to bring ELAC acoustic heritage and elevated design to accessible hi-fi systems. The Debut 3.0 DB63 pairs a newly developed aramid fiber woofer with a newly developed aluminum dome tweeter, supported by cabinet bracing and refined cosmetics, for a speaker that looks clean in a modern space and plays with clarity, control, and impact.

Key Features

  • Newly developed 1 inch aluminum dome tweeter designed for clear, detailed high frequency reproduction and wide dispersion
  • Newly developed 6.5 inch aramid fiber woofer engineered for tight, accurate bass with low distortion
  • Internal cabinet bracing to reduce unwanted vibrations and improve tonal accuracy
  • Magnetically attached grilles for a clean, hardware-free look and easy removal
  • Easy to drive design intended to work well with a wide range of amplifiers
  • Dual flared bass reflex port and 5-way metal binding posts

Sound and Use Case

DB63 is designed to deliver a balanced presentation with strong bass definition and articulate detail. The aluminum dome tweeter is intended to preserve nuance in vocals and instruments while maintaining consistent coverage across the listening area. The aramid fiber woofer is designed for punchy, well-defined low frequencies with minimal coloration. Internal bracing helps keep the cabinet quiet so sound is driven by the drivers rather than cabinet resonance.

This is a strong fit for stereo music systems, desktop hi-fi, and compact living room setups where you want full-range performance from a bookshelf form factor. With a 6 ohm nominal impedance and 87 dB sensitivity, DB63 is intended to reach satisfying volume with modest amplifier power.

Technical Specifications

Model ELAC Debut 3.0 DB63
Speaker Type 2-way, bass reflex
Frequency Response 42 Hz to 38 kHz
Nominal Impedance 6 Ω
Minimum Impedance 4.8 Ω at 200 Hz
Sensitivity 87 dB (2.83 V/1 m)
Crossover Frequency 2000 Hz
Recommended Amplifier Power 20 to 140 W
Nominal and Peak Power Handling 120 W
Tweeter 1 inch aluminum dome
Woofer 6.5 inch aramid fiber
Cabinet CARB2 rated 16 mm MDF
Cabinet Finish Black Ash Vinyl, Satin Black Vinyl Front
Port Dual flared
Binding Posts 5-way metal
Dimensions (W x H x D) 7.7 x 13.3 x 17.3 inches (195 x 339 x 298 mm)
Net Weight 17.3 lb (7.85 kg)
Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.2 / 5 · 5 reviews)

Riley ★★★★★

I've been using these for about two weeks now, and the waveguide design on the tweeter really opens up the soundstage. The aramid fiber woofer feels solid, and the bass is surprisingly tight for a 6.5-inch driver. A definite upgrade for my listening room.

Thomas N. ★★★★★

Swapped out my old towers for these on a desk setup and the bass surprised me—that 6.5" woofer digs deeper than the size suggests. Vocals sit right where they should, nothing harsh up top even after a few hours of listening.

Julian ★★★★☆

The aramid fiber woofer really tightens up the low end compared to what I had before, and vocals come through clean without sounding harsh. Only gripe is they need a decent amp to wake up — hooked to my cheap receiver they sounded flat at first.